Shop - Accessories

Mini-NodeMcu Lua WiFi-Board based on ESP-8266-12F

Features:

• compatible with Espressif ESP32 DEV KIT C
• built-in ESP-WROOM-32 chip
• 4MB Flash, 520KB SRAM
• uses wireless protocol 802.11b/g/n
• Bluetooth v4.2 BR/EDR and BLE
• built-in PCB antenna
• uses CP2102 USB Serial Chip

Fits perfectely in our AZ-Touch and ArduiBox ESP Kits

MBUS Master modules for integration in your own projects with the following features:
- MBUS Master for a maximum of 6 load units (9 mA)
- galvanic isolation
- MBUS supply voltage 5 - 24VDC
- Supply voltage digital side 3.3V - 5V
- Dimensions 33mm x 30mm x 12mm

Spare part set for AZ-Touch. Contains different female headers:

• 1x 14pole female header for display
• 2x 19pole back entry (centipede) header
• 2x 8pole back entry (centipede) header

• Ethernet controller Wiznet W5500
• Control via SPI
• Transmission speed: 10-100Mb/s
• 3.3V or 5V power supply
• Size: 36 mm x 59 mm

Suitable for our ArduiBox Feather din rail enclosure sets

Do you need more power for your application? You can combine this voltage regulator module with your ArduiBox or RasPiBox Basic Kit:

• Input Voltage: 9V - 35V DC
• Output Voltage: 1.23V - 30V (pre adjusted to 5V)
• Output Current: 3A (Max)

Extend your Arduibox and/or RasPiBox enclosure kit with a breadboard. In combination with our soldering and assembly service you need no soldering skills to realise your own extension circuits.

• self adhesive breadboard
• grid 2,54mm
• dimension (L x W x H) 46 x 35 x 9mm
• 170 contacts in 17 columns and 10 rows
• incl. two  20pole socket strips

For usage in extra low voltage (<25 V AC or < 60V DC) circuits only.

RS485 Module for integration in our RasPiBox Open, RasPiBox Zero and Arduibox enclosure sets:

• On Board MAX 485 Chip, it’s a low power transceiver for RS 485 communication
• On board 5.08(mm) 2P connector for RS 485 wires
• All the pins of the chip are brought out, can be controlled by MCU
• Working voltage 5V
• PCB dimension:44(mm)x14(mm)

Attention. In combination with Raspberry Pi a simple voltage divider as level shifter is needed. Please see the application note!

MeanWell power supply unit type DR-15-5 for DIN rail as extension for our RasPiBox Basic Kits and ArduiBox Basic Kits:

• Directly mountable on the DIN rail
• Closed design, screws connections protected against accidental contact
• Universal input
• Overload protection via current limit, auto recovery
• Protected against short circuit, overload, excess voltage
• Low idle power
• LED display for power on
• Insulation class II

Technical data:
Output voltage: 5 V DC
Output voltage range: 4.75 - 5.5 V
Output current: 2.4 A
Output: 12 W
Ripple: 80 mVp-p
Input voltage: 85 - 264 V AC/120 - 370 V DC
Efficiency: 77%
Starting current, max.: 65 A/230 V AC
Operating temperature: -40 - +85°C
Size: 25 x 93 x 56 mm
Weight: 0.1 kg